Maipu MP1800X-40, Руководство по установке

Страница: 57 / 65

MP1800X Series Router
Appendix
copyright

2017Maipu, all rights reserved
D-7
restart or reset.

With regard to the AC distribution capacity in the equipment room, the equipment
working current and fault current shall be taken into full account. Independent
equipment shall be guaranteed to have independent AC distribution protection
device. And the protection switch configured shall be bigger than that of the
lower-level electric equipment.
The allowable fluctuation range of the power supply input of the equipment using AC is
as shown in the following table.
Appendix Table D-4 Requirement for fundamental AC power supply
Item Index
Input voltage range
100
～
240V
Input frequency range 50/60Hz
Caution:

The AC conducting wires shall be flame-retardant and routed as specified in the
Code for Fire Protection Design of Tall Buildings (GB50045-95). In the event of
low-voltage distribution, it shall be implemented in accordance with the Code for
Design of Low Voltage Power Distribution Installations and Wiring Systems
(GB50045-95).

The devices adopting the AC power supply include MP1800X-50 and the power
adapter AD24-1S0N.
D2.2 DC Power Requirement
The allowable fluctuation range of the power supply input of the equipment using DC is
as shown in the following table.
Appendix Table D-5 DC power requirement
Item Index
Input voltage range
11.4V
～
12.6V