Version
：
V1.0
（
2022.10
）
Copyright © 2022 Mainlink All Rights Reserved
39
The Air System Update function is used for firmware upgrade. Before the upgrade, please
download the required firmware from our official website to your computer. Please click
"Browse..." to select the upgrade file and click
“
send
”
to confirm. The system sends the upgrade
file and displays the upgrade progress on the web page. After the upgrade is complete, the
system automatically restarts. Log in to the IP address again to check whether the firmware
version is updated.
The operation of the Ground System Update function is the same as that of air.
Wireless pair
The Wireless Pair function is used to pair the air and the ground. The operation process is
as follows: Power on the device. Click " Pair "button to start pairing, and there will be a progress
bar to show the pairing progress; The pairing process lasts up to 2 minutes; When the pairing is
complete, the page will display a message indicating that the pairing succeeded or failed. The
signal strength indicator light will indicate the current pairing state in the form of a water lamp.
