MAINE ENERGY SYSTEMS PES 20 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 102

MAINE ENERGY SYSTEMS PES 20 Скачать руководство пользователя страница 39

39

12.3 Party

The party function extends the heating time once, without changing the heating times.

Party

is in the Main menu.

The party function is basically inactive. Enter the
time until the room temperature heating should
be heated. Activate the Party function.
The heating time is extended up to the indicated
time. Then the party function deactivates itself
automatically.

12.4 Vacation

The holiday programme cancels the heating times and heats for the entered period on the set temperature
level.

Vacation

is in the Main menu.

Enter the room temperature on which in your
absence the building should be heated. Enter
the departure (start time) and return (finish
date) and activate the vacation programme.

Note:

To return in an already tempered building,
you must enter the day before the return as
the finish date.

Operating Manual AutoPellet® PES 20, 32, 56

«
...
37
38
39
40
41
...
»

Содержание PES 20







































































































Отзывы:

Нет отзывов