MAINE ENERGY SYSTEMS PES 20, Руководство по эксплуатации, Страница: 17 / 102

Fuel 17
6 6
Fuel
Wood pellets are natural wood (dried sawdust or waste from machining) that has been formed into pellets
under high pressure. They have a very low moisture content and very high calorific value. The manufacture of
wood pellets is regulated by European standard EN ISO 17225–2.
Fuel Property PFI Premium
Normative Information – Mandatory
Bulk Density, lb./cubic foot
40.0 – 46.0
Diameter, inches 0.230 – 0.285
Diametern mm 5.84 – 7.25
Pellet Durability Index
≥
96.5
Findes, % (at the mill gate)
≤
0.50
Inorganic Ash, %
≤
1.0
Length, % greater than 1.50 inches
≤
1.0
Moisture, %
≤
8.0
Chloride, ppm
≤
300
Heating Value
NA
Informative Only – Not Mandatory
Ash Fusion NA
N Ne ev ve err u usse e p pe elllle ettss tth ha att c co op pn ntta aiin n ttrre ea atte ed d w wo oo od d,,
c co ollo orre ed d p pa ap pe err p prro od du uc cttss,, c ca arrd db bo oa arrd d,, sso ollv ve en nttss,, p plla assttiic c
ttrra assh h o orr g ga arrb ba ag ge e..
Never burn trash, plastics, gasoline, solvents, naphtha,
houshold garbage, material treated with petroleum
products such as particleboard, railroad ties und
pressure treated wood leaves, paper products,
cardboard.
6.1 Specification for high quality pellets as per EN ISO 17225–2,
class A1 and by PFI standards in North America
Calorific value
≥
4,6 kWh/kg or
≥
16,5 MJ/kg
Loose density
min. 600 kg/m³
Water content
max. 10% Specification for high quality pellets as per EN
ISO 17225–2, class A1
Ash content max. 0.7%
Length max. 40 mm
Diameter 6 mm
Fine material max. 1%
Contents 100% natural wood
Operating Manual AutoPellet® PES 20, 32, 56