DVR operation manual
62
Export set
：
Export the all system’s configuration into the storage device.
Import set:Import the device configuration as exported.
Note:
1.If you want to import/export data,don
’t set SD card or USB as record device,that’s means don’t enable
SD record or USB record.
2.After import the configuration,the HDD type in the HDD manage and the user in the account are not
change.
5.6 System info
Display the device information, including HDD info, code stream statistic, log info, version info
.
5.6.1 HDD info
Display the hard disk state: hard disk type, overall capability, residual capability, the recording time
and so on.
Pic 5.51 HDD info
Tips
：
○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that
there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR
and take up all the damaged hard disks,then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is
damaged, the information will show “
？
”.
5.6.2 BPS
Display the code stream
（
Kb/S
）
and hard disk capability
（
MB/H
）
in real time. It displays as the wave
sketch map.
