INSTRUCTION MANUAL FOR DISHWASHERS
Page 7 of 14
4.2
Switching the dishwasher on
Referring to
Fig. 2
•
Turn on the main power switch and open the external water tap.
•
Check the presence of the overflow, where foreseen.
•
Press
ON/OFF (1)
.
•
The machine runs a drain cycle even if the tub is empty.
•
The
START
(
3
) button flashes green.
•
The machine then starts to load water, the timer bar indicates
the residual loading time
•
When the
START
(
3
) button is fixed and green, it indicates
that the machine is ready for use, the
DISPLAY
(
4
)
shows the set programme,
OK
indicates that
the washing temperature is correct (
Fig. 2
) .
4.3
Filling the rack
Referring to
Fig.3
,
to ensure the correct operation of the dishwasher follow the rules described below:
•
Use a suitable rack, fill without overloading and without overlapping the dishes.
•
Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
•
Place the empty dishes in the rack facing downwards.
•
Place plates and the like in the sloping rack, with the inner surface facing upwards.
•
Place the cutlery in the cutlery basket, handle end down.
•
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
•
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
•
Use only solid, dishwasher-proof dishes.
4.4
Cycle selection and start-up
•
Select the wash cycle suited to the dishes to be washed by pressing
SELECT PROGRAMMES
(
2
).
•
To start the programme just press
START
(
3
): during the programme the timer bar will
progressively indicate the residual time (
Fig.5
).
•
When the cycle has finished the display will show
End
.
•
For rapid drying, take the rack out of the machine as soon as the cycle finishes.
•
To stop a wash cycle early, press
START
(
3
).
N.B. In hood versions, after the first work cycle the automatic start is automatically enabled; the
subsequent cycles will be enabled automatically when the hood is closed. This operating mode
is marked on the display by “A”.
4.5
Selecting special programmes
This dishwasher has special wash programmes.
You can choose the most suitable programme and memorise it for future use.
•
Using the
SELECT PROGRAMMES
(
2
) button, select the memorised special programme.
•
With the door open, select the required programme by pressing
START
(
3
).
•
The chosen special programme will remain memorised and can be chosen simply by pressing
SELECT PROGRAMMES
(
2
).
Warning: the special programmes available depend on the dishwasher model.
Содержание Evolution 2035WS
Страница 2: ......
Страница 3: ......
Страница 17: ...INSTRUCTION MANUAL FOR DISHWASHERS Page 14 of 14 UK ...
