Maico WR 410, Быстрый старт, Страница: 14 / 36

14
4 Operating components/
instructions
For the user
Simple control unit included in the scope
of delivery.
App

App-Store (iOS)
Play Store (Android)
for smartphone/tablet
WebTool software* software for PC/note-
book not linked to a
specific browser
Operating instructions* Important information
for the operator
For the specialist installer
Installation instructions included in the scope
of delivery.
Commissioning and
maintenance instruc-
tions*
Information about
settings and
parameters
Commissioning
software*
Settings software
for PC/notebook
List incomplete / * www.maico-ventilatoren.com
5 Switching ventilation unit
on and off
On/off with main switch , for
Flat
and
Trio
units using mains fuse in fuse box.
To put
units into standby
on the control unit,
select the Off operating mode (not possible
with simple control unit).
6 Operating with the simple
control unit
The simple control unit (RLS 1 WR)
can be used to manually set the ven-
tilation levels. LEDs show the ventila-
tion level selected, an imminent filter
change or a fault.
In ventilation level II (nominal ventilation), the
ventilation unit switches to automatic mode *
(Auto Sensor operating mode). Automatic
mode ensures hygienically perfect ventilation
using the measured humidity values and/or
the CO
2
/5VOC air quality values determined
with external sensors.
* Setting can be changed by the installer.
Level Designation
I-III Increase ventilation level using

key
or decrease using

key.
I Ventilation for humidity protection: LED
I flashes. Preservation of building using
interval ventilation:
13 min. on – 17 min. off – 13 min. on ...
I Reduced ventilation (continuous
operation). LED I on.
II Nominal ventilation (continuous oper-
ation): LED II on. Unit running in Auto
Sensor operating mode.
III Pulse ventilation: Intensive ventilation
with timer. LED III flashes. The unit
switches back to nominal ventilation
once the time interval has elapsed.
III Intensive ventilation (continuous
operation). LED III on.
– Filter change display: LED II flashes.
– Fault: All 3 LEDs flash.
7 Operating with smartphone
1. Scan the QR code with your smartphone or
tablet

App-Store (iOS) / Play Store
(Android).
2. Load the app onto your device.
3. Launch the app. The Log in screen
appears.
iOS Android
Activating for your smartphone
When logging in, call up
Register
and give us
your contact details and the serial number of
your ventilation unit. Your access details will
be e-mailed to you.