9 Commissioning
45
ModBus settings
1
2
3
RS 485 inactive
ModBus act-
ive 9600 Baud
ModBus active 19200 Baud
This adjuster activates the
ModBus and sets the baud
rate. Notice: When the Mod-
bus interface is active, ex-
ternal sensors/LTs/RLS can-
not be connected.
ModBus address
1
2
3
4
5
6
7
Address 10
Address 11
Address 12
Address 13
Address 14
Address 15
Address 16
This adjuster selects the Mod-
Bus address.
* The service menu items are set according to the 3-digit binary code 111, e.g. the adjuster "5" is dis-
played as 101 → Upper and lower LEDs light up.
9.3 RLS 45 K service menu
Bold
Factory settings
LED flashes quickly
LED flashes slowly
LEDs
Parameters
Set value /
ventilation level
Setting /
description
Device type on RLS
(Fan1/Fan2)
1
2
PP 45
PPB 30 O
Here, the type family, which is
connected to the Fan1/Fan2
interface, is selected.
Notice: Only single-type
PP 45 or PPB 30 unit combin-
ations are permitted at the fan
interface!
Number of device pairs/
devices on RLS (Fan1/
Fan2)
1
2
3
4
5
1 PP 45 or 1 PPB 30 unit pair
2 PP 45 or 2 PPB 30 unit
pairs or
3 PP 45 or 3 PPB 30 unit
pairs
Odd number 3 PP 45 units
Odd number 5 PP 45 units
The number of units connec-
ted to the fan interface (Fan1/
Fan2) is selected here. No-
tice: Release/number of
Содержание PPB 30 O
