Maico PPB 30 O, Руководство по установке

Страница: 32 / 96

5 Application example
32
PPB 30 O Operation with RLS 45 O or RLS 45 K
control. PPB 30 K with RLS 45 K control.
PPB 30 RC units are operated using a DS 45 RC
radio switch (alternatively with RLS 45 K + radio
extension module PP 45 EO).
Not possible / not permissible:
● The operation of PPB 30 K units in combination
with an RLS 45 O control;
● A combination of PPB 30 K with exhaust air
units (e.g. ER…/ECA…);
● A combination of PPB 30 O and PP 45 O/K
units at the fan interface (Fan1/Fan2).
RLS 45 K 3 operating modes (heat recovery,
cross-ventilation, automatic mode), 5 ventilation
levels, time-limited intermittent ventilation, time-
limited switch-off, safety shutdown, ModBus, con-
figuration with PC (USB).
PP 45 EO radio module
can be added to integrate radio sensors.
RLS 45 O 3 operating modes (heat recovery,
cross-ventilation, automatic mode), 5 ventilation
levels, configuration using service menu.
A
PPB 30 external cover with integrated condens-
ate drain is required for installation with a wall
sleeve.
The fan/heat exchanger unit is designed as a duct
mounting and can be removed for repair and
cleaning purposes.
PPB 30 ventilation units are only intended for do-
mestic use and similar purposes. No other or ad-
ditional use is intended.
5 Application example
Ventilation solution for a 3-room flat with PPB
30 K
ventilation units for the bathroom and PP
45 ventilation units for living spaces
The PPB 30 in the bathroom ventilates and ex-
tracts air from the room, at the same time, in bal-
anced mode. A fan in the unit extracts air and first
transfers the exhaust air heat to the heat storage
tank. Another fan in the unit pumps the supply air
into the room across the heat storage tank, which
gives off this heat. Every 60 seconds, the air dir-
ection changes, thereby permitting a ventilation
mode with constant heat recovery.
Intensive ventilation can be activated via a humid-
ity sensor or manually with a button if the humidity
is high and/or if the air quality is inadequate.
Pure exhaust air mode is also possible and here
the two fans pump out humidity (no heat recov-
ery).
Combined with PP 45 single-room ventilation
units for supply air rooms, a decentralised ventila-
tion system for flats can also be produced for re-
development projects.
The
PP 45 units ensure an increased supply of air
and therefore balanced ventilation, even if ex-
haust air mode is sometimes used.
Example: Combination of PPB 30 K + PP 45
units
1 PP 45 unit with alternating operation for
continuous ventilation of living spaces
2 PPB 30 K unit with balanced operation for
continuous ventilation in the bathroom
3 Room air control RLS 45 K
Supply air and exhaust air with change of
direction
Outside and outgoing air with change of
direction