Maico MB 11 Classic, Руководство по эксплуатации

Страница: 24 / 72

Operation Manual MB 11 Classic
8100498-4_OM_MB11_Classic_3.18_EN_16a.docx 22 01/16
5.3 Device Recognition
You can connect multiple MB 11 devices to a single computer. When more
than one MB 11 device is attached to the PC, a pop-up window displays the
connected instruments when the software is launched. At that time you can
choose the device you want to use with a mouse click. The most common
scenario in which you would experience this pop-up window is if you have
purchased a combination system including both the MB 11BERAphone and
the MB11 Classic hardware.
To change between the BERAphone and the Classic hardware between
screenings, after the software has been launched, press CTRL + U and the
pop-up window opens allowing you to select your alternate hardware.
To close the program, just click on the “QUIT” <Q> button located on the
bottom right of the screen. Additional functions are located in the Menu bar
at the top of the screen. It contains the menus “File”, “Settings” and
“About”.
After starting the computer, launch the MB11 software by clicking the
shortcut icon “MB 11 USB Version” on the desktop or direct from the
program menu.
The program launches with the start screen (see Figure 4).
Figure 4
Start screen of the MB 11 program