Maico ECA 100 ipro, Монтаж и эксплуатация, Страница: 20 / 34

18
8.4 Start-up
 Switch the mains fuse on.
 Carry out a function test.
8.5 Start delay and overrun time
When the setting button is pressed for
the first time, the value currently set is
displayed. The LEDs are off during
operation.
For condition in which unit is supplied,
see table in Chapter 3.1.
 Remove designer cover [7] carefully
(see Fig. B).
 Set start delay:
Press setting button [11] until the LED for
the start delay time you want lights up.
Wait until the LED flashes twice and goes
out. The value is now saved.
 Set overrun time:
Press setting button [12] until the LED for
the overrun time you want lights up. Wait
until the LED flashes twice and goes out.
The value is now saved.
When the setting buttons are
changed, the value currently set is
adopted.
 Fit designer cover [7] (see Fig. B).
9.
Maintenance
The unit is maintenance-free.
10.
Cleaning
DANGER
Danger to life. Unit is
powered up.
 Switch the mains fuse off.
NOTICE
Damage to unit if incorrect
cleaning agent is used!
 Only clean cover [6] and
designer cover [7] with water.
 Do not use aggressive
cleaning agents.
NOTICE
For ECA 100 ipro K: lamella may
break if cleaned incorrectly.
 Take care when cleaning. Do
not exercise force when
opening, shutting or bending
the lamella.
 Only clean inside parts of the fan with a dry
cloth.
 If the designer cover [7] is very dirty,
remove it carefully (see Fig. B) and clean
with water.
 Fit designer cover [7] (see Fig. B).
11.
Fault rectification
● Call on the services of a trained electrician
any time there is a fault.
● Repairs should only be carried out by a
trained electrician.
DANGER
Danger to life. Unit is
powered up.
 Switch off mains fuse before
working on electrical
connection.
Fault Cause / Measure
Fan does not
switch on. Start delay
(max. 120 seconds).
 Wait for the start delay
and reduce if necessary,
see Chapter 8.5.
i
i
i
GB