UK
│
Table of contents
12
ECA 100 ipro fans
Please read the instructions carefully
before mounting and using for the
first time. Follow the instructions.
Pass these instructions onto the
owner for safekeeping.
Unit overview, Fig. A - C
1 Housing with motor
2 Impeller
3 Cable grommet
4 Electronics cover
5 Internal grille or internal shutter
5.1 Fixed internal grille
5.2 Electrically operated internal shutter
5.3 Bimetal
6 Cover
7 Designer cover
8 Electronic circuit boards
8.1 Standard electronics
8.2 Sensor electronics
(only for models F, H and B)
8.3 VZC electronics
9 Sensors
9.1 Motion sensor “B”
9.2 Light sensor “F”
9.3 Humidity sensor “H”
10 Start delay/overrun time for LEDs
11 Start delay setting button
12 Overrun time setting button
Table of contents
1. Specialist installer qualification ............... 12
2. Intended use .......................................... 12
3. Safety instructions and warnings ............ 13
4. Operation ............................................... 15
5. Product information ................................ 15
6. Environmental conditions and operating
limits ....................................................... 16
7. Technical data ........................................ 16
8. Installation preparations ......................... 16
8.1 Wall ................................................. 16
8.2 Ceiling ............................................. 17
8.3 Duct ................................................ 17
8.4 Fan.................................................. 17
9. Installation .............................................. 17
9.1 Installing housing ............................ 17
9.2 Electrical connection ....................... 18
9.3 Operating programs ........................ 18
9.4 Start-up ........................................... 20
9.5 Start delay and overrun time ........... 20
10. Maintenance ........................................ 20
11. Cleaning ............................................... 20
12. Fault rectification .................................. 21
13. Dismantling .......................................... 22
14. Environmentally responsible disposal .. 22
15. Wiring diagrams ................................... 34
1. Specialist installer qualification
Mounting may only be carried out by
spe-
cialists
who have the necessary knowledge
and experience in
ventilation engineering
.
Only a
trained electrician
is permitted to
work on the electrics. You are deemed a
trained electrician if you are familiar with the
relevant standards and guidelines, can
competently and safely connect units to an
electrical power supply in line with the
attached wiring diagram and are able to
recognise and avoid risks and dangers
associated with electricity on the basis of
your technical training and experience.
2. Intended use
Fan for extracting air from bathrooms,
toilet rooms, storage rooms, showrooms,
offices, fitness studios, changing rooms and
similar places.
Acknowledgements
© Maico Elektroapparate-Fabrik GmbH. This
instruction is a translation of the German original
operating instructions. We cannot be held responsible
for mistakes or printing errors and retain the right to
make technical modifications without giving prior
notice.