Maico ECA 100 ipro RC, Монтаж и эксплуатация, Страница: 29 / 50

EN
27
9.3 Master-slave assignment
A fan automatically becomes a
master fan if the master unit is set to
receive mode and a teach-in telegram
is received from a slave unit.
9.4 Switching a receiver to teach-in
mode
Press and hold the teach-in button [10] at 1.
the receiver (fan) for at least 2 seconds.
> The button LED flashes, the teach-in
mode is activated.
Now, a teach-in telegram must be 2.
received within 60 seconds or the teach-in
mode is terminated.
9.5 Setting up transmitters
When a teach-in telegram is correctly
received, the receiver's button LED
lights up for 1 second. The transmitter
is now set up.
Teaching-in radio switches
In the case of double-rocker switches
(DS RC), both rockers have to be set up
separately (2 channels).
Activate teach-in mode at the receiver 1.
(fan).
> LED flashes. Teach-in mode is activated.
Press the radio switch's right-hand rocker 2.
3 times within 2 seconds.
> The teach-in telegram is sent.
If teaching-in is completed successfully,
the LED lights up for approx. 1 second.
If transfer was faulty, the button LED
flashes briefly
3 times .
Re-activate teach-in mode at the receiver 3.
(fan).
Press the radio switch's left-hand rocker 4.
3 times within 2 seconds.
> The teach-in telegram is sent.
If teaching-in is completed successfully,
the LED lights up for approx. 1 second.
If transfer was faulty, the button LED
flashes briefly
3 times .
Re-activate teach-in mode at the receiver 5.
(fan).
Press the right-hand rocker 3 times within 6.
2 seconds
> The teach-in telegram is sent.
Teaching-in radio window contacts
Activate teach-in mode at the receiver 1.
(fan).
> The LED flashes, the teach-in mode is
activated.
Press the teach-in button at the radio 2.
window contact.
> The teach-in telegram is sent.
If teaching-in is completed successfully,
the LED lights up for approx. 1 second.
Teaching-in an RLS RC room air control
The teach-in button is on the rear of the
controller.
Activate teach-in mode at the receiver 1.
(fan).
> The LED flashes at the fan, the teach-in
mode is activated.
Press the RLS RC teach-in button 3 times 2.
within 2 seconds.
> The teach-in telegram is sent.
If teaching-in is completed successfully,
the radio icon in the display flashes
briefly
3 times .
The radio icon is then permanently
visible in the display.
Teaching-in a slave fan
Activate teach-in mode at the master 1.
receiver and at a fan that is not yet set up
(planned slave).
> The LED flashes, the teach-in mode is
activated.
Switch the slave to send mode. To do this, 2.
press the teach-in button [10] at the slave
fan briefly
once .
> The LED at the slave lights up briefly
and then flashes briefly once . The slave
fan is now in send-learn mode.
i
i