Maico ECA 100 ipro RC, Монтаж и эксплуатация, Страница: 32 / 50

EN
30
Fan does not switch on.
Cause Remedy
No mains voltage. Switch the mains
fuse on.
Impeller blocked. Fault rectification
may only be carried
out by a trained
specialist.
Remove cover [6].
Release the internal
grille [5] at the
locking hooks (

arrow) and remove
it. Check impeller and
clean if necessary.
Humidity control is
not working
correctly/is faulty
with RCH units. Call on the services
of an expert.
Motor's thermal overload protection
switches the fan off.
Cause Remedy
Motor too hot. Wait until the motor
has cooled down.
Cool-down time can
be up to 10 minutes.
Unit switches back
on automatically
after cooling down.
Fan doesn't react to radio commands
Cause Remedy
Fans are not correctly
set up. Delete all component
transmitters (Delete
mode

Chapter 9.6).
Delete the transmitter
at the RLS RC.
Power the fan off
briefly. Then set up
the components
again.
Fans are out of range. Switch repeater mode
on at a fan that is
within range.
If the range is still not
enough, deploy
additional repeaters,
to be supplied by the
customer.
14. Dismantling
DANGER
Danger to life from electric
shock.
Dismantling may only be
undertaken by an electrician.
Switch off mains fuse before
removing.
Release and remove the cover [6] 1.
(

arrow, Fig. above).
Remove electronics cover [4] (3 latches, 2.

Chapter 8.2).
Remove power cable. 3.
Remove fan. 4.