Maico DS 45 RC, Руководство по установке, Страница: 32 / 104

1 Preface
32
1 Preface
These instructions contain important information
about
final installation of the slide-in modules
and internal covers . Final installation takes
place once the plastering and paint work is com-
plete.
Note the enclosed safety instructions.
• For information on
shell installation
→ PP 45/PPB 30 shell
installation instructions
• For information on the
installation of ventila-
tion components,
commissioning and
the large variety of
setting possibilities for
the ventilation system
→ PP 45/PPB 30 in-
stallation and commis-
sioning instructions
• For commissioning
software
• For information on
operation
→ PP 45/PPB 30 oper-
ating instructions
• Accessory compon-
ents
→ enclosed installation
instructions
Further instructions and videos
• Brief instructions for changing filters, setting
ventilation levels and operating modes
• Video - PP 45 Connecting the internal cover
• Video - PP 45/PPB 30 filter change
• Video - Connecting controls
• Video - Installing and teaching-in DS 45 RC ra-
dio switch
• Videos - RLS 45 K Service menu, RLS 45 O
Service menu, RLS 45 RC Service menu
• Video - PP 45 RC Teaching-in master and
slave
• Video - PP 45 RC, PPB 30 RC installation
2 Safety
• Read these instructions and the enclosed
safety instructions carefully before installa-
tion.
• Follow the instructions.
• Pass these instructions on to the owner/operat-
ing company for safekeeping.
3 Scope of delivery
Scope of delivery depends on system con-
figuration.
PP 45 O ventilation unit
• Slide-in module, complete with fan unit and
ceramic heat exchanger
• One G2 and one G3 air filter
• Complete internal cover with manually ad-
justable shutter
• Motor connection plug with separate sheet
metal
• These installation instructions for final installa-
tion kit
PP 45 K ventilation unit
• Slide-in module, complete with fan unit and
ceramic heat exchanger
• One G2 and one G3 air filter
• Complete internal cover with manually ad-
justable shutter
• These installation instructions for final installa-
tion kit
PP 45 RC ventilation unit
• Slide-in module, complete with fan unit and
ceramic heat exchanger
• One G2 and one G3 air filter
• Complete internal cover with manually ad-
justable shutter
• These installation instructions for final installa-
tion kit
4 Intended use
PP 45 ventilation units with heat recovery are
used for air extraction/ventilation of apartments,
offices or similar rooms. They are suitable for new
buildings and renovation work. The units are de-
signed for 24h operation. The housing unit’s vent-
ilation system should be configured in accordance
with DIN 1946-6.
PP 45 are ventilation units, which are generally
only suitable for use in supply air rooms . To
achieve efficient ventilation of these units, we
would recommend operating the
PP 45 in pairs,
with alternating ventilation and air extraction .
The units are installed in exterior walls (wall thick-
ness 265-790 mm) The electrical connection is
made to a permanent electrical installation.