DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
P0335
CRANKSHAFT SENSOR NO SIGNAL ERROR.
CRANKSHAFT (INCREMENT SPEED) SENSOR
The crankshaft speed sensor is an inductive type sensor. It is mounted on front LH bottom side of the
engine and measures the speed of the trigger wheel mounted on the crankshaft
.
DTC INFORMATION
PROBABLE CAUSES OF FAILURE
NORMAL OPERATION
Ignition ON
During engine cranking and running, the EMS ECU receives
the output signal from crankshaft speed sensor and is within
the range
DTC DETECTING CONDITIONS
Ignition ON
EMS ECU supply voltage 8-16V
While engine cranking/running,no crankshaft speed signal
DTC REACTIONS
Engine check lamp continuously ON.
Engine will not start/Engine stops
HEALING CONDITION
Ignition Off/On
Sensor mounting loosened
Open/short crankshaft
speed sensor circuit
Faulty crankshaft speed
sensor
99