DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
SYMPTOM BASED DIAGNOSTICS- WITH NO DTC CODES
Complaint -
Engine not starting
Error codes -
No error codes
.
Caution :
After dry run , switch the Ignition OFF for 1 min and then switch it ON
Follow the above step for 3 to 5 times & then crank.
If the engine is still not starting , loose filter bleeder screw and ensure no air in the fuel system
Presence of Banjo with overflow valve must, otherwise engine will not start.
No kink in the fuel leak off from Rail
If all are found OK then :
Thru diagnostic tester Open the "
LIVE DATA
" in EMS ECU .
Check the "Info for trouble in engine starting"
329