DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
P2128
SIGNAL RANGE CHECK FOR APP PEDAL SENSOR 2 ABOVE MAXIMUM LIMIT
ACCELERATOR PEDAL
The Accelerator pedal module (APM) is mounted in place of accelerator pedal and is connected to the ECU
by wires. The APM is a potentiometer whose output voltage changes according to the pedal position. ECU
applies a reference voltage to the APM sensor and then measures the voltage that is present on the APM
sensor signal circuit. The ECU uses the APM sensor signal for further calculation of fuelling & other engine
operational parameters.
DTC INFORMATION
PROBABLE CAUSES OF FAILURE
NORMAL OPERATION
Ignition ON
EMS ECU receives an output voltage signal from the
accelerator pedal module sensor 2 and is within the specified
range
DTC DETECTING CONDITIONS
Ignition ON
EMS ECU supply voltage 8-16V
The output voltage signal received from the accelerator pedal
module sensor 2 is above the maximum limit.
DTC REACTIONS
OBD check lamp continuously ON
Torque limitations
HEALING CONDITION
Ignition Off/On
Short /open in
accelerator pedal
module sensor 2 circuit
Faulty accelerator pedal
module
Faulty EMS ECU
191