manualshive.com logo in svg

Mahindra ML170 series, Руководство оператора и инструкции по установке

Поделиться
Скачать
Mahindra ML170 series Скачать руководство пользователя страница 42

 

41 

7. DISMOUNTING THE LOADER 

 

CAUTION: Always park loader with material bucket attached to the loader. 

 

CAUTION: Before leaving the tractor seat, lower attachment or loader boom to ground, stop 
engine, lock brakes, relieve hydraulic pressure, and remove key. 

 

CAUTION: Do not stand, walk, or work under a raised loader or attachment unless it is securely 
blocked or held in position. Accidental movement of valve handle/handles or leaks in the 
hydraulic system could cause the loader to drop, or attachment to dump, causing severe injury. 

 

CAUTION: Do not allow bystanders in loader work area. 

IMPORTANT: Never allow weight of tractor to be placed on parking stands when mounting or 
dismounting loader. 

7.1.1. Position the loader on a hard level surface. The 
more level the surface the easier the loader is to 
mount and dismount. 

 

7.1.2. Raise loader, dump bucket over, and then lower 
loader so that bucket cutting edge is approximately 
1/2" off of ground. 
 

Bearing Box 

 

Tower 

 

Cutting edge of bucket 

1/2" off of ground. 

 

 

7.1.3. Remove rubber strap and loosen hoses from 
RH side of tractor cab.  
 
 

Remove Rubber Strap 

Loader Hoses 

 

 

 

 
 
 
 
 
 
 
 

Содержание ML170 series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды