Mahindra MARAZZO M2 2020, Руководство пользователя, Страница: 104 / 288

7-4
© Copyright Mahindra and Mahindra Ltd. 012020
This lamp monitors airbag sensor assembly, airbag sensors,
indicator lamp, seat belt pre-tensioner assemblies, inflators,
interconnecting wiring and power sources.
If either of the following conditions occur, there is a malfunction of
the airbags or seat belt pre-tensioner. Immediately contact your
Authorised Mahindra Dealer.
• The lamp does not glow when the ignition is switched ON or
glows beyond six (6) secs. after switching the ignition ON
• The lamp comes ON at any other time, even briefly
• The lamp comes ON intermittently
Never make any modifications to your vehicle which could affect
the performance of your airbag system. In particular, changes
to the vehicle frame, bumpers, bull bar, front fenders, ride
height, suspension, seat belts, interior trim, seats or steering
wheel (especially covers, pads or other trim), could prevent
proper deployment of the airbag. If you need to make any
modifications to accommodate any disability you may have,
please contact your Authorised Mahindra Dealer.
Never try to open or strike the airbag cover. If the airbag cover
is cracked or damaged in any way, the airbag may not function
as intended. Take the vehicle to an Authorised Mahindra
Dealer.
Even if the airbags do not deploy during an accident, take your
vehicle to an Authorised Mahindra Dealer for a thorough inspection
of the airbag and seat belt systems, no matter how minor the
accident. The airbag system could have been damaged, and may
not work as intended in the future, resulting in serious injury.
7 7..5 5 A Aiirrb ba ag g IIn nfflla attiio on n/ /D De ep pllo oyym me en ntt
The airbag sensors constantly monitor the forward deceleration of
the vehicle. If an impact results in a forward deceleration beyond
the designed threshold level, the system triggers the airbag
inflators. This initiates a chemical reaction which quickly fills the
airbags with non-toxic gas.
Upon deployment, tear seams moulded directly into the pad covers
separate under pressure from the expansion of the airbags.
Further opening of the covers allows full inflation of the airbags. A
fully inflated airbag, in combination with a properly worn seat belt,
slows the driver's or the passenger's forward motion, reducing the
risk of head and chest injury.
After complete inflation, the airbag immediately starts deflating,
enabling the driver to maintain forward visibility and the ability to
manoeuvre or operate other controls.
Deployment of the airbags happen in a fraction of a second,
producing a loud noise releasing a ‘white smoke’ and residue along
with a non-toxic gas. This does not indicate a fire. This smoke may
remain inside the vehicle for some time, and may cause some
S SU UP PP PL LE EM ME EN NT TA AL L R RE ES ST TR RA AIIN NT T S SY YS ST TE EM M ((S SR RS S))