Mahindra BOLERO NEO N10 2021, Руководство пользователя

Страница: 209 / 289

11-12
© Copyright Mahindra and Mahindra Ltd. 112020
Once the passenger compartment reaches a comfortable
temperature, shift to fresh air, AC LO mode (manual HVAC). Also
blower speed and temperature control knob can be re-adjusted as
desired.
If your vehicle was parked in the hot sun with all the windows
closed, drive the vehicle with windows open for the first few
minutes. This will help in venting the hot interior air out and
allow the air conditioner to cool the cabin quickly.
1 11 1..1 14 4 R Ra ap piid d C Ca ab biin n H He ea attiin ng g
For rapid heating of the cabin, the following AC settings are
recommended:
1.
Make sure that all the windows are fully closed
2.
Set the blower to maximum speed
3.
Set the air distribution control to foot mode
4.
Set air intake control to recirculation mode
5.
Set the temperature control knob to extreme right (hot)
position
6.
For dehumidified heating, switch the air conditioner ON in AC
HI mode (manual HVAC)
Once the passenger compartment reaches a comfortable
temperature, the blower speed and temperature control knob can
be readjusted as desired. Also if AC HI was selected earlier, you
should shift to AC LO mode (manual HVAC).
In extreme cold weather conditions, the engine coolant takes
time to get heated up. Hence it might take a while for hot air to
discharge, even though the blower is running and the
temperature control knob is set to the hot position.
1 11 1..1 15 5 D De effo og gg giin ng g/ /D De e--m miissttiin ng g a an nd d D De effrro ossttiin ng g
For keeping the front windshield and side windows clear, proper
control of the HVAC system is essential.
Follow the instructions in the subsequent sections to clear the
frosted/misted/ fogged up front windshield.
H HE EA AT TIIN NG G,, V VE EN NT TIIL LA AT TIIO ON N A AN ND D A AIIR R--C CO ON ND DIIT TIIO ON NIIN NG G S SY YS ST TE EM M ((H HV VA AC C))