Mahindra BOLERO NEO N10 2021, Руководство пользователя

Страница: 132 / 289

© Copyright Mahindra and Mahindra Ltd. 112020
9-11
sensed by the RLS sensor. This is useful when travelling through
tunnels or low light areas.
There may be a difference between ambient light intensity
sensed by the RLS sensor and the human eye. Hence it is
possible that during low light conditions, the head lamp is
activated early as the RLS sensor senses it as low intensity.
This is a normal behavior.
9 9..1 16 6 H He ea ad d L La am mp p L Le evve elliin ng g S Syysstte em m
When the vehicle is either fully or partially loaded, it may have an
upward inclination disturbing the head lamp aiming. A correct head
lamp setting provides good visibility to the driver with minimum
inconvenience to other road users.
To properly aim the head lamp beam, use the head lamp leveling
switch. This switch is located on the right side of the steering
column shroud in the instrument panel. This switch has four
positions marked as 0, 1, 2 & 3.
S Sw wiittc ch h
P Po ossiittiio on n
V Ve eh hiic clle e L Lo oa ad diin ng g C Co on nd diittiio on n
0
Driver only or Driver with front passenger
1
Front pas Rear seat occupied
2
All seats occupied
3
All seats occupied with luggage OR Driver with luggage at
extreme rear side.
Select the suitable switch position depending on the pay load as
advised in the table.
The headlights can only be adjusted when the low beam is
switched ON.
W12H20
F FE EA AT TU UR RE ES S A AN ND D C CO ON NT TR RO OL L