Mahindra ALTURAS G4 2019, Руководство пользователя

Страница: 314 / 340

8-6
© Copyright Mahindra and Mahindra Ltd. 092018
• Clean the dipstick with clean cloth so that any foreign
materials cannot get into the engine
• The oil should not go above the upper mark on the dipstick
• The engine oil may be consumed more if the engine is new
Operating vehicle with insufficient amount of oil can damage the
engine. Make sure the engine oil level is correct and add oil if
necessary.
8.1.2 Function of Engine Oil
Engine oil’s major function is to lubricate and cool the parts inside of
the engine, which enables engine to work properly.
When driving at High Engine Speeds
As long as you keep the following with sufficient care in your first
running the vehicle, it will guarantee you to get excellent and
comfortable performance for long with your vehicle.
• Remember to check the engine oil level and shorten the cycle to
refuel the engine oil under severe driving conditions
• Avoid subjecting the engine to heavy loads by driving at full
throttle, especially be careful when the outside temperature
remains below freezing for the first 1000 km.
What’s Severe Driving Condition?
• Driving at the high engine speed or at high-speed
• Driving for consecutive two hours at high speed
• Driving the rough road, off-road, dirt-laden road, and muddy
roads
• Driving in areas where salt or other corrosive materials are
being used
• Repeated driving in short-distance
• Driving with the excessive idling
8.1.3 Engine Care
Observe the following to keep the engine in good condition:
• Check the engine oil level frequently under severe driving
condition and add some if necessary. The change interval should
be shortened as well
• Do not run a new engine at high speed until its driving distance
gets 1000 km. Be extra careful when the engine is cold
• After installing a new engine, do not tow another vehicle or a
trailer until its driving distance gets 1000 km
MAINTENANCE SCHEDULE AND MANAGEMENT