© Copyright Mahindra & Mahindra Ltd. 012016
10-5
10.5 Blower Speed Control
U42K07
A
/ C
0
1
2
3
4
0
1
2
3
4
S12K07
The blower force-circulates air through the HVAC unit and
distributes it throughout the passenger compartment.
Blower is OFF when the blower speed control knob is set to small
“o” position (extreme left). To switch-ON the blower, rotate the
control knob clockwise which progressively increases the blower
speed.
10.6 Temperature Control
A
/ C
0
1
2
3
4
S12K08
By operating the temperature control knob, temperature of air
being discharged from various vents can be adjusted to the desired
level. Engine coolant is utilized to heat, whereas the air conditioner
is used to cool the air inside the AC unit. Based upon selected
position of the temperature control dial, the desired discharged air
temperature can be obtained.
By rotating the dial counter-clockwise and setting it to the extreme
left position, maximum cooling is obtained. When the dial is rotated
clockwise, the discharged air progressively starts getting warmer
and at the extreme right position, hot air is discharged. When the
temperature control is in approximately two O’ clock position the air
intake is automatically shifted to fresh air mode. This facilitates
better functioning. At the same time if the customer is not
comfortable , he can manually override and switch to recirculation
mode
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
