8-30
© Copyright Mahindra & Mahindra Ltd.012016
8.14.5 Engine Coolant Temperature Gauge
The engine coolant temperature bar graph functions only when the
ignition is switched ON. It indicates the instantaneous engine
coolant temperature. The coolant temperature varies with changes
in weather, load on engine and driving pattern. LCD bar rises from
Cold (C) towards Hot (H).
S12H45
At normal operating temperature, 4 bars are displayed in the LCD
bar graph. The high engine coolant temperature lamp along with 7
bars blink when the temperature reaches 110 o C with buzzer alert
for 4 seconds, and when the temperature is 114 o C, the
temperature warning lamp and all 8 bars are permanently ON. In
such situations switch OFF the AC and observe any improvements
in the temperature gauge. If not, stop the vehicle and allow the
engine to cool down. Check the coolant level in the coolant reservoir
and top-up if required. If the engine is still overheating, contact your
nearest Authorized Mahindra Dealer.
Never remove the degassing tank cap when the engine is hot.
The engine coolant is under pressure and could splash on to
skin/eyes causing severe burns. Wait for the engine to cool
down before adding coolant to the reservoir.
Do not continue driving the vehicle with a overheated engine.
This will lead to damage of engine components and engine
seizure.
8.14.6 Fuel Level Gauge
The fuel level bar graph functions only when the ignition is switched
ON. It gives the status of the fuel level in the fuel tank. F indicates
the tank is full (35 liters), E indicates the tank in empty. The amount
of fuel required to fill the tank up may be less than the specified tank
capacity, as a small amount of reserve fuel always remains in the
tank.
When the tank is nearly full, 8 bars illuminate on the LCD bar graph
display. When the tank is near empty i.e. RESERVE, the bottom bar
alone is illuminated and the low fuel warning lamp in the cluster is
ON.
FEATURES AND CONTROL
