Mahindra 10 Cab Series 4510C, Руководство оператора

Страница: 94 / 115

Check battery Low voltage Slip during rotation Slip
Replace malfunction No defect wire
Adjust Clutch gap large Engaged to push
with hand
Check wire Wire defect Engaged sometimes Disengage
Control the
compressor
direction Interference with
pulley Regular noise
Irregular noise
Noise 3. Clutch
Check,tighten Air volume control
switch failure Motor Unable to
control the fan
Check,tighten Duct leakage Air leakage
Replace Wire cut
Replace Motor failure Motor is abnormal
Motor is abnormal Replace Motor failure
Replace Compressor
Replace Malfunction
Clean Oil stick at clutch
Check battery Low voltage
Replace the switch Ventilator switch
damage
Controlling
minimum pressure Evaporator freezing
Air inlet clogged
CAUSE
Remove Motor is normal Weak from
pressure or
don”t work 2.Motor
REMEDY CONDITION SYMPTOM
(2) How to check the air conditioning system with the needle of high low gauge
To connect with manifold pressure gauge can find the cause of air conditioning system.
Because manifold pressure gauge is various sensibly (Ambient Temp. is based on 30~35
℃
)
Caution
:
Operating E/G RPM 1500~2000 is must, and so to that you can check the correct cause
and air conditioning.
(In case below the figure of indicated pressure gauge has some clearance, confirm with approximate
indicated needle data.)
Gauge pressure conversion
●
lb/in²=PSI
●
1 kg/
㎠
=14,223 in²
(Ex) 200 PSI=14 kgf/
㎠
88