19
BA492301-en
Pos: 73 /Produktfamilien/Alle Geräte/Überschriften/Überschriften 1.1.1/S/Überschrift 1.1.1: Single-Betrieb @ 12\mod_1231750604943_75.docx @ 301400 @ 3 @ 1
3.6.2
Single Mode
Pos: 74 /Produktfamilien/Hebetechnik/- Archiv -/00 Hebetechnik - Alle/Inhalte/Inhalt: WARNUNG - Einzelbetrieb Radgreifer-HBZ @ 26\mod_1325576623142_75.docx @ 1144493 @ @ 1
WARNING
When operating the lift in Single mode, make sure the vehicle is not tilted. Other-
wise the vehicle may fall off the lift!
Pos: 75 /Produktfamilien/Hebetechnik/COLUMNLIFT/490801 RGE/BA/Inhalt: 4908 Single-Betrieb (mit Warnaufkleber) @ 26\mod_1325576735271_75.docx @ 1144525 @ @ 1
Select "Single mode" by pressing
this button on the desired column.
Activation of this operating mode is
indicated by the lit LED on the se-
lector button and the letter S on the
seven-segment display.
The columns not in Single mode are
temporarily inoperative. This is indi-
cated by the letter A flashing on the
seven-segment display.
Use these buttons to raise or lower
the lift.
or
Pos: 76 /Produktfamilien/Hebetechnik/- Archiv -/00 Hebetechnik - Alle/Inhalte/Info!/Inhalt: INFO - Verschiedene Hubsäulen RGE_12pt @ 26\mod_1325576923309_75.docx @ 1144557 @ @ 1
The single mode can also be used for several columns simultaneously.
Pos: 77 /Produktfamilien/Hebetechnik/- Archiv -/00 Hebetechnik - Alle/Inhalte/Info!/Inhalt: INFO - Single-Betrieb RGE_12pt @ 26\mod_1325577705655_75.docx @ 1144589 @ @ 1
Height offsets between individual columns will be maintained after switch-over to
automatic mode. The offset can be removed either
– by equalizing the carriages in single mode or
– by lowering all carriages to bottom position in automatic mode.
•
Lift switches off once first carriage reaches upward travel stop.
Pos: 78 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
