MAHA LPS 3000 Скачать руководство пользователя страница 97

Страница: 97 / 115

BA052301-en

10.1.5

Load simulation profile

Using the menu point LOAD SIMULATION PROFILE the measurement screen and the print out
can be set for customer-specific needs.

Create new profile

1 Call up the menu DATABASE and then the

menu point LOAD SIMULATION PROFILE :

→

The database Browser appears.

2 Use the button <F5 NEW>.

→

The screen for the profile settings

appears.

The profile setting screen is divided up into the
following areas:

PROFILE NAME

ANALOG DISPLAY

DIGITAL DISPLAY

PRINT OUT SETTING

Analog display

Two analog displays are available.

1 Select the measurement values to be

displayed from the list.

2 Enter the min. and max. values as well as

the scaling factor.

3 Enter the limit values for the green, yellow

and red ranges.

4 Use <F6 IMPORT> to display the settings.

Digital display

There are six digital displays available.

1 Select the measurement values to be

displayed from the list.

Содержание LPS 3000




















































































































Результаты поиска

Содержание LPS 3000

Отзывы:

MAHA LPS 3000, Руководство по эксплуатации, Страница: 97 / 115

Результаты поиска

Содержание LPS 3000

Отзывы: