MAHA CONNECT Series, Оригинальная инструкция по эксплуатации

Страница: 61 / 138

61
BA023001-en
Alternatively, free QR code generators can be found on the Internet, which can be
used to generate a personal QR code for the CONNECT brake tester.
If this is photographed (e.g. on iOS devices) or scanned with a QR code
scanner app, the standard browser is automatically opened and the Inter-
net address entered.
6.3.4 Variant 2: Establishing a WiFi connection
If the test bench is to be controlled wirelessly, a WiFi router (e.g. TP-Link) can
optionally be connected to the ZM (Ethernet X13 MAHA). This creates a separate WiFi
for the brake tester and enables networking with corresponding accessories (e.g.
analogue display, C_BOX). This makes it possible to use browser-capable smart devices
(SmartPhone, tablet PC) in addition to the PC/NB to operate the brake tester and
display the measured values.
Windows PC
On the underside of the router, there is a label that indicates the name next to “SSID”
and the wireless password next to “PIN”.
•
Connect WiFi router “TP - Link” with power supply
and switch on.
•
In the Network and Sharing Center, select WiFi rout-
er SSID “TP_LINK_xxxx” and establish a connection.
•
Enter the wireless password “PIN”.
Mobile devices (Android or iOS)
On the bottom of the optionally available WiFi router there is a label on which the
name is printed next to "SSID" and the wireless password next to "PIN".
•
Connect WiFi router “TP - Link” with power supply and switch on.
•
On the mobile device, open the WiFi menu under “Settings”.
The device will now search for available WiFi devices.