MAGUIRE Ultra-600, Установка, эксплуатация и обслуживание

Страница: 55 / 109

Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
55
ULTRA By Maguire

- Ultra Low Energy Dryer
Changing Parameters
Changing parameters can have an impact on the Dryers performance. It is highly
recommended that a supervisor change the default Program Mode password to
protect the parameter values. Prior to making any parameter changes, make sure
you understand what you are doing.
Navigating and Making Changes to Parameters:
Press Display will prompt for a password. (default: 22222) Then press:
Press
Dryer Configuration
Display will show the Dryer Configuration categories.
Press
Parameters
Display will show the categories of Parameters.
Parameters are divided into 6 categories. Blower, Heater,
System, Dispensing, Load-Cell, and Vacuum.
Press
The category that would
contain the parameter you
want to adjust.
Categories will have several parameters indicated by a 3-letter
acronym on the left of the screen.
Some categories have multiple pages. Navigate pages using
the arrow buttons at the lower-left of the screen.
Press
The parameter that you
want to adjust.
Display will show 5 digits.
Press the up or down arrows to adjust.
Press
To save the parameter adjustment or
press the red X to cancel and exit.