Maguire Products MLS Clear Vu, Установка, эксплуатация и обслуживание

Страница: 20 / 38

Maguire Products, Inc.
20
MLS Clear Vu

SETUP OPTIONS - DETAILED EXPLANATIONS
There are several SETUP routines that allow you to customize your controller for your
installation.
ROUTINE 0. Display current software version.
Turn POWER OFF.
Turn ALL STATION switches OFF.
While pressing "SET LOAD TIME" button, turn POWER ON.
Hold for 3 seconds, while all lights blink rapidly.
Release when blinking stops.
The lighted switches represent the software version number in binary format.
For switch numbers: 1 2 3 4 5 6 7 8
Assign values of: 1 2 4 8 16 32 64 128
Add up the values of the lighted switches to obtain the version number.
To EXIT, turn power off.
ROUTINE 1. Reset selected stations to default load times.
Turn POWER OFF.
Turn STATION 1 switch ON, all others OFF.
While pressing "SET LOAD TIME" button, turn POWER ON.
Hold for 3 seconds, while all lights blink rapidly.
Release when blinking stops.
Turn ON all stations you want to reset.
Turn OFF all stations you want unchanged.
Press and hold "SET LOAD TIME" button for 1 second.
All lights will flash and then go off.
Release button to resume normal operation.
ROUTINE 2. Enter an address for this controller.
If you are using the Dual Controller Option two controllers are linked together
with a specially wired communication cable that we supply. This cable connects
the communication ports of the controllers. There can only be one "Main"
controller,
the other one is the “Follower”. The address of the Main must be 78.
The Main runs the blower. The blower control cable is connected to the Main.
Single units are always addressed as
“Main”; address 78. The Follower is
addressed with a 1 in front (178).
Here is the routine to change the address.
Turn POWER OFF.
Turn STATION 2 switch ON, all others OFF.
While pressing "SET LOAD TIME" button, turn POWER ON.