Magtek MT-95, Инструкция по установке и эксплуатации

Страница: 27 / 54

Section 3. Standalone Operation
19
CARD COPYING
To copy cards, follow these steps:
1.
When in the Main Menu, press
C
on the keyboard. The following display will appear:
Insert the original card
or press Esc to exit
2. Insert the card from which the other cards will be copied. The display will be:
- -
> Slide card right when ready
- -
>
3. Slide the card, and if the read is good, the following will appear:
ISO format data read on tracks 1 2 3
Remove the card
4. Remove the card and the following will appear:
Insert next card to encode
or press Esc to exit
5. Insert the card to be encoded and the display will be:
Encoding data on tracks 1 2 3
-
> Slide card right when ready
->
6. After the card has been swiped from right to left to encode the card, a read-after-write
operation is performed. If the card was correctly encoded, the display will be:
*** CARD ENCODED CORRECTLY ***
Remove the Card
Remove the card.
To copy a series of cards, repeat steps 4, 5, and 6.