manualshive.com logo in svg

Magtek MICR Plus, Техническое справочное руководство

Поделиться
Скачать
Magtek MICR Plus Скачать руководство пользователя страница 15

 

7 

 

SECTION 3.  OPERATION 

 
This section contains check and card reading procedures and LED indicator states. 
 

CHECK READING PROCEDURE 

 
1. 

Orient the check so the MICR line is down and the printed side faces the center on the 
MICR Plus as shown in Figure 3-1. 

 

 

Figure 3-1.  Check Orientation  

 

 
2. 

Drop the check so the leading edge is in the open slot. 

 
3. 

When the unit detects the presence of the check, the motor will turn on.  At this time 
gently urge the check forward until the unit grabs the check.  When this happens, release 
the check.  The check will then be transported around the check path and will exit 
through the other side. 

 
4. 

After the check is read, the Reader will transmit the data as specified by the parameters 
described in Section 4, “Commands”. 

 

CARD SWIPE PROCEDURE 
 

The card may be swiped through the Magnetic Stripe Reader (MSR) in either direction, but the 
magnetic stripe must be oriented in only one direction as shown in Figure 1-1.  The reader will 
transmit raw card data (“as is” on the card) for all tracks that have been enabled using the HW 
(Hardware) command (Section 4, Commands). 
 
The MSR is capable of reading ISO, AAMVA, and CDL encoded cards.  The MSR will 
autodiscriminate all the card formats when the ID Card Decoding option is enabled using the 
HW command (Section 4, Commands). 
 

Содержание MICR Plus







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды