1 - Introduction
mDynamo| EMV Contact Reader / Transaction Hub Module | Installation and Operation Manual
Page 9 of 27 (
D998200144-14
)
1
Introduction
This document provides suggestions, guidelines, and technical information for designing solutions that
integrate
mDynamo
, MagTek’s modular contact chip card reader for OEM solutions.
1.1
About mDynamo
mDynamo gives users the flexibility to add a variety of identification and payment acceptance options
from a compact, modular design. The small form-factor makes it easy to integrate into new or existing
unattended locations including kiosks, vending, parking, or payment terminals; and is an ideal solution for
mobile payment applications involving tablets and phones to accept payments almost anywhere. The card
reading module is easy to incorporate into an enclosure. mDynamo is engineered to save the integration
designer money in a single, low-cost, yet highly secure device.
1.2
Simple Integration
Using an updated bezel, mDynamo can be added to a new design or, if only magnetic stripe is being used,
retrofitted to existing insertion style magnetic stripe readers. The chip card reader and optional NFC
module are certified for EMV L1 and L2. MagTek offers a variety of software developer kits (SDKs) to
use with Windows, iOS, and Android operating systems.
1.3
Contact Chip Card
mDynamo is an affordable and flexible card reading module. It is designed to read contact chip cards that
conform to ISO 7816 standards. mDynamo supports a variety of connection options that can support
additional card reading technologies, including magnetic stripe readers/SCRAs and contactless/NFC
modules. The board is well designed for a compact footprint while offering easily accessible SPI and
UART ports with Molex connectors.
1.4
Security
mDynamo is built on the MagneSafe Security Architecture (MSA). When coupled with MagTek’s
Magensa services, MagnePrint magnetic stripe card authentication can be activated to stop fraud and the
use of altered cards. mDynamo uses TDES encryption and DUKPT key management to protect card data.
1.5
Magensa Services
mDynamo is supported by the full suite of Magensa's Services: Data decryption, card and device
authentication, gateway, device configuration, and key injection. MagTek provides well-defined and
documented web services and several off-the-shelf applications for reader configuration on Windows,
iOS, and Android platforms.
1.6
Fast Development
Invest in mDynamo and receive dedicated software, hardware, and payments support. Working with
MagTek OEM is the fastest way to secure, compliant, flexible payment solutions for your custom device.
1.7
USB Options
The primary communications interface is USB. mDynamo is powered over USB so there is no need for
additional cabling or external power supplies.
