3 - Mechanical Integration
mDynamo| EMV Contact Reader / Transaction Hub Module | Installation and Operation Manual
Page 21 of 27 (
D998200144-14
)
3.2
Cabling Design
Consider the following when designing cabling:
Make sure the enclosure provides adequate clearance for all required cables. The enclosure should
also take into account the need for assembly and maintenance access and should support the device
against cable connection and disconnection forces.
Consider using a right-angle connector for
to reduce space requirements and make
strain relief easier.
Consider cable ties or comparable strain relief for the USB cable.
For stability, consider using locking connectors when using
