2 - Installation
iDynamo 5 and iDynamo 5 (Gen II)| Secure Card Reader Authenticator | Installation and Operation Manual
Page 18 of 33 (
D99875473-120
)
2.3
How to Disconnect from a Host
To disconnect iDynamo from the host, follow these steps:
1)
Make sure all installed apps that use iDynamo are either closed or disconnected.
2)
Turn off the iPad host’s display to avoid accidentally launching or interacting with apps.
3)
Disconnect the pass-through charging cable, if one is connected.
4)
Carefully pull iDynamo’s adapter sleeve straight out from the host.
