6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 39
Figure 6-19 - Inserting and Locking Card Stock Hopper
10)
Re-insert the hopper into the EC2000 in the release position. Be sure the hopper is level and that all
four lock pins on the bottom have inserted into the hopper deck.
11)
Slide the hopper into the locked position (the direction indicated by the “Lock” arrow on the handle)
until you feel a click as it locks in place.
12)
Repeat the procedure for any other hoppers you want to load.
Figure 6-20 - Correct Card Stock Hopper Loading
