4 - Configuration
DynaPro| Secure Cryptographic Device for PIN and Data Entry | Installation and Operation Manual
Page 26 of 40 (
D99875586-41
)
4.1
How to Configure the Display Brightness
To adjust the device’s display brightness or contrast, press
Left Function Key
5
2
3
Right Function
Key
(the numbers 523 correspond to the letters “LCD”) to show the
Adjust LCD
page. Press
1
to
decrease the brightness or
3
to increase the brightness. To exit and apply the selected brightness setting,
press the green arrow key.
Figure 4-1 - Adjusting DynaPro’s Display Brightness