Magnum MIG 160 Mini, Руководство пользователя

Страница: 9 / 18

9
6. KIT CONTENTS 6. KIT CONTENTS
The following items should be included: The welding
device with a handle MIG-MAG
x 1 pc.
Work cable MMA
x 1 pc.
Cable to the common terminal x 1 pc.
Attention!
For the safety of children should not be left freely accessible parts of the packaging
(plastic bags, cardboard, polystyrene, etc.). Risk of suffocation!
7. USE 7. USE
7.1 Connecting to the network
Before switching the device to the mains, check the size of the voltage, phase and
frequency.
Parameters supply voltage are given in the technical specification section of this manual and on the
rating plate.
Check the grounding wire connection device to the mains. Make sure the power network can ensure
coverage of the power demand for the input of the device under its normal operation.
Fuse size and parameters of the power cord are given in the technical data of this manual.
The supply network should have a stable voltage. Cross-section of the supply lines should not be
less than 2.5 mm.
Devices which do not have power plugs connected by. tips listed below.
Connecting and sharing the power cord and the plug should be made by a qualified
electrician.