Tools needed: #2 & #3 Phillips head screwdrivers, 1/2” socket or wrench.
IMPORTANT! Start all screws BY HAND when assembling your shear. This will help avoid cross-threading.
1. ATTACH RAILS
2. ATTACH TAIL
Quick Start Guide
for Magnum Shear Model #520
for Magnum Shear Model #526
(1) Power Assembly
(1) Handle Assembly
(1) Angle Guide
(1) Table
(1) Power Assembly
(1) Handle Assembly
(1) Angle Guide
(1) Table
The Hardware Kit is used in multiple models. Your Shear may not use all of the items listed.
The Hardware Kit is used in multiple models. Your Shear may not use all of the items listed.
(1) Tail
(2) Rails
(1) Hone Stone
(1) Hardware Kit
(1) Tail
(4) Rails
(1) Hone Stone
(1) Hardware Kit
In the Box:
In the Box:
In the Hardware Kit:
In the Hardware Kit:
Attach rails to Power Assembly base using
Item A
screws, fitted with
Item B
star washers.
Attach tail to rails using
Item C
screws.
Make sure holes in tail are facing up.
ASSEMBLING YOUR SHEAR
Item A. (4) 6mm x 65mm PH Phillips Machine Screws
Item B. (4) M6 Star Washers
Item C. (6) 6mm x 25mm PH Phillips Machine Screws
Item D. (5) M6 x 16mm FH Phillips Machine Screws
Item A. (8) 6mm x 65mm PH Phillips Machine Screws
Item B. (8) M6 Star Washers
Item C. (8) 6mm x 25mm PH Phillips Machine Screws
Item D. (6) M6 x 16mm FH Phillips Machine Screws
Item E. (4) #10 x 1 FH Phillips Self Tapping Screws
Item F. (2) M8 x 50mm Hex Bolts
Item G. (1) M6 Thumbscrew (installed)
Item E. (4) #10 x 1 FH Phillips Self Tapping Screws
Item F. (2) M8 x 50mm Hex Bolts
Item G. (1) M6 Thumbscrew (installed)
Power Assembly
1
2
Tail
Model
520
Model
526
1
2
Power Assembly
Tail
