46
Note 1:
The factory default is the mosaic mode, DVI output; If
other modes are required, switch in the output setting - working
mode/output mode.
Note 2:
In the mosaic mode, the layer supports 90° times
rotation, but only rotates the display content inside the layer, the
size of the layer does not change. On DVI output, the layer can
only support rotation in a single output p, not across the output.
For example, layer 1 spans the output DVI 1-DVI 2, and the
rotation function is not available. Under HDMI output: the layer
can only be rotated in half of the output port.
Note 3:
Switcher mode only supports HDMI output, HDMI 2 work
as preview (output has red preview indicate). HDMI1 is main
output, when output resolution is 4K×1K and below, support 3
layer to 3 layer preview switch, and LAYER1 support Full roaming,
LAYER2 only supports moving in the left half of the output, LAYER 3, only
supports moving in the right half of the output.
In 4K×2K output resolution, support 1 layer to 1 layer preview switch.
vertical datum.
Layer zooming
parameters
Adjust layer zooming size,
position, datum.
Duration
Select the main/backup input duration on the
backup mode, default Cut, could choose LVL
1,LVL 2,LVL 3.
Auto
Backup
Function is enabled/disabled.
TAKE
Together
The function is enabled/disabled, and mutually
backup is exclusive with automatic backup.
When this function is enabled. in the same
LAN, multiple W4000 support synchronous
manually TAKE backup.