37
Note 1:
In the “
Input Signal Information
”,after expanded the
module then there shows 13-16 item; If not, no 13-16 item.
Note 2:
When using Tile, all the selected input sources should
have the same resolution. Tile support up to 4 sources to combine.
Note 3:
When using image crop, please select input 1 to 6, then
select the signal need to be cropped, in the below area.
Note 4:
Image crop function is selected a part of input signal, then according
to the layer size output to the LED screen. So the image crop window size and
position are always limited in the input signal resolution. All the setting in the
table above are mutually restrictive.
under cropping.
Function off
Turn off the image crop function.
Function on
Turn on the image crop function
reset
Reset the parameters of image crop.
Match input
signal
Match the image parameters between
input signal and below image crop.
Image crop
parameter
setting
H position
Alter the horizontal
position of image crop.
H width
Alter the horizontal width
of image crop.
H datum
Alter the horizontal
datum of image crop.
V position
Alter the vertical position
of image crop.
V height
Alter the vertical height of
image crop.
V datum
Alter the vertical datum
of image crop.
Digital Input
Color Range
Default to automatic, limited and full is alternative.
Input Information
For Layers
See all layers input information, including: current
layer’s port number, resolution, refresh information
(accurately to 0.01).