36
Input Information For Layers:
Input Information For Layers
Layer 1 Input1-DVI 1920×1080 60.00Hz
Layer 2 Input2-DP No Signal
Layer 3 Input3-SDI No Signal
Layer 4 Input4-DVI 1920×1080 60.00Hz
Input Signal
Information
Display all the input signals’ information of each input
port, the content sequence — signal type — input
resolution or no signal — the bandwidth of current
input port.
Input MUX Config
By rotating knob or touching the screen to choose the
main signal of each input MUX. Select main input
signals of input 1 to input 6, corresponding to 3 or 2
input sources on the right side. The left side of each
input source, green strip means valid signal, red strip
means no signal. White and yellow text: yellow means
this source is the input MUX of corresponding input,
white means not yet used.
TILE Keys
Configuration
Through Tile,multiple signal combine to one signal,
support 2 groups tile,Tile 1 and Tile 2. By press “EDIT”
key,there shows a choice box, we can add several
input signals into combination. The signal not in Tile
will be showed as “
Undefined
”,click “
EDIT
” to change
if needed.
Image crop
All sources of input 1-6 can be cropped freely. By knob
or screen touching, select the input 1-6, then select
the source, then enter the menu of image crop to crop
the image.
DVI Input 1
It means the sequence and input signal