17
In the browse mode, rotate the knob anticlockwise, the menu will go up or go
left. Rotate the knob clockwise, the menu will go down or go right. Rotate and
press the knob(or press “OK”button)，the menu option will be selected.
After that, rotate the knob anticlockwise, the value of the selected option will
decrease, while the value will be increased when rotating the knob clockwise.
For other menu’s setting of this page, please swift to the browse mode. Press
the return key to back to the previous menu. If the setting is finished, press
return key until the default status, or stay for the operation timeout for auto
return. At some menus like image switching window, preset window, and test
pattern window, auto return will not occur when operation is timeout.
WINDOWS：
There are 4 buttons in this area, MIAN, PIP1, PIP2 and PIP3. They are in
accordance with the selected image in the processor.
Long press to the button will turn on or turn off the selected image . White
stands for used, and red stands for the current selected.
Quick press to the button will select the image.
INPUTS：
There are 10 buttons in this area, DVI1, DVI2, HDMI1, HDMI2, DP, SDI, EXT1,
EXT2, LEFT and RIGHT. EXT1 and EXT2 are the extended ports. If the input is DP,
the processor will internally cut the image into 2 parts, named LEFT and
RIGHT.
Select the image at WINDOWS area, and the select the correspondent input
signal.
Any button will turn white when there is input, and turn red if the input is
selected.