15
Main menu introduction
The main menu will show the symbols listed in the table below, please check
its specific meaning in the table below:
Symbols Explanation
>>
Press“RIGHT”or“OK”to enter the detail setting page, or operate that directly.
▼
The next page is after this page, press“DOWN”button in the last item of this
page to enter the next page
▲
Before this page is the previous page, press the first project“UP”to enter the
previous page.
In the main MENU, the user can use the "MENU", "UP", "DOWN", "LEFT",
"RIGHT", "OK" the six buttons to select and adjust the each item. Its operation
is fixed pattern, please check the following table:
Operation
Button
Open the main menu
Press“MENU” in the un-menu state
Select the each item
Press“UP”or“DOWN”
，
When there is“
▼
”or“
▲
”symbol on the right of the
item ,there will be paging action.
Adjust the parameters
When there is digital parameter or option on the right of the item, please press
“LEFT” or“RIGHT”.
Enter the next level
menu
When there is“>>”on the right of item, press“RIGHT”or“OK”
Performs some specific
functions
When there is“>>”on the right of item, press“RIGHT”or“OK”
Back to the higher level
menu
Press“MENU”
Confirm operation
When the reset operation, to avoid the incorrect operation, need to use
the ”OK” button to confirm operation