42
Multi-machine fade in fade out
If you want to use multi machine fade in fade out function, besides
connecting the machine according the above mentioned "multi-machine
connection mode", it is also required to the connection for the rear panel
signal line. Specific connection mode and setting please refer to below
：
No. 0
No. 1
No. 2
No.3
DVI IN
DVI IN
DVI IN
DVI IN
LED
DVI OUT
DVI OUT
DVI OUT
DVI OUT
Other
Other
Other
Other
P0
P1
P2
P3
P4
Machine ID
0
1
2
3
Multi
Connection
Multi
Multi
Multi
Multi
Ch. 1 Port
P0
P1
P2
P3
Ch. 2 Port
DVI
DVI
DVI
P4
Auto Switch
Off
Dual Pictures
On
Menu state
Main Menu->Dual Pictures->Fade In&Out Switch->Multi Connection
Or
Non-Menu State->FADE function hotkey->Multi Connection
Above the diagram, with four LED-540 for example, the arrows represent the
flow of DVI signals. Finished the setting of each machine according to above
picture, the four machines formed a signal switching station. When need to
display the image of the P1 port, just click the“OK”key on no.1 machine,
similarly, if need to display P3 port image, then in no.3 machine click a "OK"
button. The switching time for fade in fade out is from 0 second to 5 seconds
for adjustment.
In the final level of the video processor, channel 2 can be set to any one port
which is not conflict with its own channel 1 port, such as the P4 port in the