manualshive.com logo in svg

Magnetic MHTM FlowMotion mTripod, Руководство по эксплуатации, Страница: 48 / 84

Поделиться
Скачать
Magnetic MHTM FlowMotion mTripod Скачать руководство пользователя страница 48

48

mTripod

Installation and assembly

7.8.3 

Mounting variant “Glue base plate”

With this type of installation, you first glue the base plate onto the foundation 

or the finished floor. Then mount the turnstile on the base plate.  

For the variant mTripod FMTP-ML you need 8 screws. For the variant mTripod 

FMTP-MS you need 6 screws.
Required material (attachments):

 ›

Base plate FURA100 for mTripod FMTP-ML

 ›

Base plate FURA101 for mTripod FMTP-MS

 ›

Attachment set BSKL100 for gluing the base plate

 ›

Attachment set BSS100 for mounting the turnstile on the base plate 

(foundation anchors and composite mortar are not required)

Prerequisites

 ›

The foundation / finished floor was erected.

 ›

The empty conduits were laid.

 ›

The foundation / finished floor has hardened.

IMPORTANT!
Follow the separate instructions and packaging labels for the 

surface cleaner, construction adhesive and remover.
The floor must be free of paint and varnish.

ä

 Base plate and drilling template Tripod FMTP-ML: Page 39, Fig. 10.

ä

 Base plate and drilling template Tripod FMTP-MS: Page 40, Fig. 11.

Содержание MHTM FlowMotion mTripod





















































































Отзывы:

Нет отзывов