manualshive.com logo in svg

Magnetic Autocontrol MPT-333, Руководство по эксплуатации

Magnetic MPT-333 - универсальный магнитный держатель для смартфонов, планшетов и GPS устройств. Легкий, прочный и удобный в использовании. Скачайте бесплатное руководство пользователя с нашего сайта, чтобы узнать как использовать его наилучшим образом. Посетите manualshive.com и загрузите его прямо сейчас.

Поделиться
Скачать
background image

66

MPT-333

Electrical connection

8.3.1 

Opening and closing the cover

Opening the cover

1.  Loosen the screw of the cover.
2.  Dismount the protective earth conductor at the cover.
3.  Pull off the cover to the front and remove it.

Closing the cover

 DANGER

Danger to life if the protective earth conductor for the cover is not con-

nected! 

1.  Ensure that the protective earth conductor of the cover is connected to 

the service door.

2.  Put the cover onto the support beam from the front.
3.  Secure the cover with the hexagon socket screws.

8.3.2 

Opening and closing the service door

Opening the service door

1.  Open the service door with the supplied key.

Closing the service door

 DANGER

Danger to life if the protective earth conductor for the service door is not 

connected! 

1.  Ensure that the protective earth conductor of the service door is connect-

ed to the service door.

2.  Close the service door.

Содержание MPT-333





























































































Отзывы:

Нет отзывов

Похожие инструкции для MPT-333

Oxgard Praktika T-02 Maintenance Operations preview
Praktika T-02
Бренд: Oxgard Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды