manualshive.com logo in svg

Magnetic Autocontrol MPT-333, Руководство по эксплуатации

Поделиться
Скачать
Magnetic Autocontrol MPT-333 Скачать руководство пользователя страница 32

32

MPT-333

Assembly

 WARNING

Lifting of heavy loads!

The weight of heavy objects can severely injure a person's back 

or supportive system!

 ›

Preferably transport the transported goods with suitable trans-

port aids.

 ›

Alternatively, the transported goods can be carried by two per-

sons.

 ›

Lift and deposit the transport goods with two persons.

NOTICE

Possible seizure of stainless steel fasteners!

Stainless steel fasteners are susceptible to seizure.

 ›

Grease stainless steel screws before use.

7.2 

Assembly options

You can mount the turnstile as follows:

 ›

Directly on the foundation: 

With this variant, you mount the turnstile on a foundation using foundation 

anchors. The attachment set and a drilling template are included in the 

scope of delivery.

 ›

Via the optional Magnetic base frame FURA T3: 

In this version, install the base frame on a foundation with foundation an-

chors. Mount the turnstile on the base frame. We recommend this version 

because the mounting distances are specified by the base frame. This ver-

sion must be chosen for use on interlocking stone paving and cobblestones. 

Optionally, you can order an attachment set for mounting the base frame 

and an attachment set for mounting the turnstile on the base frame from 

Magnetic.

Содержание MPT-333





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды