Magnetic Autocontrol MPT-132 Скачать руководство пользователя

Страница: 22 / 68

Full Height Turnstile MPT-132

Assembly and installation

5817,5811EN / Version 02

5 Assembly

and

installation

5.1 Safety

General

WARNING

Danger by inappropriate installation!

Inappropriate installation can cause severe injuries!
– Only qualified personnel, authorise and briefed

by the contracting partner may carry out all in-
stallation and assembly.

– Prior to work, ensure that there is sufficient as-

sembly space.

– Pay attention to tidiness and cleanness at the

assembly site! Loose components and tools that
are left lying around cause accidents.

– Ensure correct arrangement and correct fit on

the components.

– Install all fastening elements correctly.

Improper transport

WARNING

Danger by falling down or tilting of a pedestrian
barrier!

The weight of the pedestrian barrier or its compo-
nents can cause serious injury and crushing!
– Have all transport work performed by trained

personnel.

– Use a pallet appropriate for the dead weight and

dimensions of the components that can be
moved by a forklift.

– To lift the pedestrian barrier or its heavy com-

ponents, use a suitable lifting gear (slings etc.)
that is rated for the weight of the pedestrian bar-
rier.

– Lifting and carrying the pedestrian barrier from

the pallet should be done by a minimum of two
people.

Содержание MPT-132





































































Результаты поиска

Содержание MPT-132

Отзывы:

Похожие инструкции для MPT-132

Бренды по названию

Популярные бренды

Magnetic Autocontrol MPT-132, Руководство по эксплуатации

Результаты поиска

Содержание MPT-132

Отзывы:

Похожие инструкции для MPT-132

Бренды по названию

Популярные бренды